The post Underwater RTI HMS Invincible appeared first on Shipwrecks and Submerged Worlds.
]]>Invincible’s outer planking is significantly thick; more resembling ‘timbers’ than planks. These huge planks were held to the frame timbers by cylindrical billets (‘trenails’) that were hand-hewn with a draw knife to a dowel shape, split at one end, and then driven with a mallet through a pre-bored hole that went clear through the planking into the frame member. Once the trenail was driven flush pinning the plank to the frame, it was then secured with a wedge of hardwood (usually English Oak) in much the same fashion an iron hammer head is secured to a Hickory handle.
Carrying a Fuji Finepix F200EXR auto-focusing underwater camera, a Bembo Trekker Mk3 tripod, a Diverite 15w 1000 lumen HID wreck diving light, and a Cultural Heritage Imaging RTI reflectance ball on the end of a threaded rod, Amy Astley (PhD student studying the taphonomy of historic shipwreck sites with the University of Southampton’s Department of Ocean and Earth Science ) and myself exited the stern of the Shogun (http://www.msdsmarine.co.uk/) into the 16c water of the Solent and made our way to a part of the wreck that has a large section of exposed planking. It did not take long to locate a trenail and setup up for its URTI dataset capture. In c. 8 meters of water with a southeasterly rising tide bringing dirty water in from the Solent at a rate of half a knot (approximately 1 foot per second), I struggled to stay in position while making this data capture. A half knot current is enough to gently blow an inexperienced diver off the site. I was entirely surrounded by smooth planking and even though I wore extra lead weight to help keep me down for the task, it was all I could do to hold onto an archaeological marker tag with one finger and freehand the light positions with the other hand. Periodically, I had to pause while debris passed by or momentarily got stuck on the trenail. In the end, and much to our amazement the camera did not move and the capture was a success.
These JPEG images are screen captures from the first ever PTM file generated from an underwater archaeological field environment. This trenail has been submerged for 255 years. It is c. 3 cm diameter. You can easily discern the longitudinal grain patterns of the wedge, the radial grain pattern in the trenail, and the clear signs of site degradation from marine wood boring micro-organisms on a surface that Dan Pascoe testifies was ‘prestine, just one season ago.’ A big thank you to Amy, the crew of the Shogun, Dan Pascoe, Dr. Sturt and my classmates for a fantastic and memorable day of diving. One more small step forward for URTI.
HMS Invincible
Show embedded map in full-screen mode
Location of HMS Invincible
The post Underwater RTI HMS Invincible appeared first on Shipwrecks and Submerged Worlds.
]]>The post Underwater Reflectance Transformation Imaging…a success. appeared first on Shipwrecks and Submerged Worlds.
]]>
The post Underwater Reflectance Transformation Imaging…a success. appeared first on Shipwrecks and Submerged Worlds.
]]>