Dr Junjie Shi

Research Fellow

I am received the B.Sc. degree from the Nanjing Institute of Technology, China in 2008, and from the University of Southampton, an MSc degree in Microelectromechanical systems in 2012 and a PhD in 2017. I was appointed, in the same year, as a Research Fellow in the Department of Electronics and Computer Science (ECS). My research interest covers a board range of wearable including but not limited to sensors, actuators, memory, and energy harvesting etc. As well as those wearable devices, I am also interested in the fabrication technologies, such as 3D printing, dispenser printing, inkjet printing, micro-fabrications, which enable the conventional and novel devices to be directly fabricated on to textiles. In addition, I can skillfully design and develop circuits and programs for embedded systems.

Research

Research interests

MEMS, Sensors, Nanofabrication, E-textile, Energy Harvesting, 3D Printing

Publications

Shi, Junjie, Yong, Sheng and Beeby, Stephen (2018) An easy to assemble ferroelectret for human body energy harvesting. Smart Materials and Structures, 1-11. (doi:10.1088/1361-665X/aabdbc).

Yong, Sheng, Shi, Junjie and Beeby, Stephen (2019) Wearable textile power module based on flexible ferroelectret and supercapacitor. Energy Technology, 7 (5), [1800938]. (doi:10.1002/ente.201800938).

Shi, Junjie, Luo, Zhenhua, Zhu, Dibin and Beeby, Stephen (2019) Optimization a structure of MEMS based PDMS ferroelectret for human body energy harvesting and sensing. Smart Materials and Structures, 28 (7), 1-13, [075010]. (doi:10.1088/1361-665X/ab1ce2).

Shi, Junjie and Beeby, Steve (2019) Textile based ferroelectret for foot pressure sensor. In FLEPS 2019 - IEEE International Conference on Flexible and Printable Sensors and Systems, Proceedings. Institute of Electrical and Electronics Engineers Inc. pp. 1-3 . (doi:10.1109/FLEPS.2019.8792228).

Beeby, Stephen, Torah, Russel, Tudor, John, Grabham, Neil, Yong, Sheng, Arumugam, Sasikumar, Li, Yi and Shi, Junjie (2019) Energy harvesting power supplies for electronic textiles. In FLEPS 2019 - IEEE International Conference on Flexible and Printable Sensors and Systems, Proceedings. Institute of Electrical and Electronics Engineers Inc.. (doi:10.1109/FLEPS.2019.8792260).

Wagih, Mahmoud and Shi, Junjie (2021) Direct-written printed dual-polarized meshed antenna for chipless RFID sensing. In General Assembly of the International Radio Science Union (URSI). IEEE. 4 pp . (In Press)

Wagih, Mahmoud and Shi, Junjie (2021) Wireless ice detection and monitoring using flexible UHF RFID tags. IEEE Sensors Journal. (doi:10.36227/techrxiv.14252657.v2). (In Press)

Komolafe, Abiodun, Zaghari, Bahareh, Torah, Russel, Weddell, Alexander, Khanbareh, Hamideh, Michail Tsikriteas, Zois, Vousden, Mark, Wagih, Mahmoud, Tronco Jurado, Ulises, Shi, Junjie, Li, Yi, Yang, Kai, Savelli, Guillaume, White, Neil and Beeby, Stephen (2021) E-textile technology review: from materials to applications. IEEE Access, 9, 97152-97179, [9471836]. (doi:10.1109/ACCESS.2021.3094303).

Shi, Junjie and Wagih, Mahmoud (2021) Flexible Direct-Write Printed RF Sensor for RF Ice Sensing. In 2021 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE.. (doi:10.1109/FLEPS51544.2021.9469841).

Wagih, Mahmoud and Shi, Junjie (2021) Complex-impedance dipole antennas as RFID-enabled ice monitors. In IEEE Antennas and Propagation Symposium. IEEE.. (In Press)

Mohamed, Mahmoud and Shi, Junjie (2021) UHF RFID Ice Detection and Monitoring Data. University of Southampton doi:10.5258/SOTON/D1849 [Dataset]

Wagih, Mahmoud, Shi, Junjie and Li, Menglong (2022) Radio frequency-enabled “green” Large Area Electronics: from robust sensors to biodegradable antennas. Innovations in Large Area Electronics (InnoLAE) 2022, , Cambridge, United Kingdom. 22 - 24 Feb 2022. (In Press)

Shi, Junjie and Beeby, Stephen (2022) The effect of fabric properties on the performance of a textile based ferroelectret generator toward human body energy harvesting. Smart Materials and Structures, 31 (4), [045015]. (doi:10.1088/1361-665X/ac56b8).

Zhang, Mingming, Shi, Junjie and Beeby, Stephen (2022) Improved charge density and stability in PDMS ferroelectrets using PTFE/PDMS composite materials. (Submitted)

Contact

Telephone: +44 (0) 23 8059 3119

Email: js4n17@soton.ac.uk

Share this profile Facebook Twitter Weibo